© 2026. Powered by C2 Computer. All Rights Reserved.
(NEW VENDOR) APC BK500EI APC BACK-UPS CS 500VA 230V
Couldn't load pickup availability
(NEW VENDOR) APC BK500EI APC BACK-UPS CS 500VA 230V
HKD 1,050.00
(NEW VENDOR) APC BK500EI APC BACK-UPS CS 500VA 230V
Overview
This product is part of the Back-UPS range. The BK550EI features a total of 6 power outlets, 3 of which are UPS battery backup and 3 that are surge only. Its runtime at 100W is 24 minutes 20 seconds It provides data line protection with a RJ45 analog phone line for phone or fax or modem or DSL. Its dimensions are 16.5 x 9.1 x 28.4 cm and 6.32kg. The BK550EI ensures office systems and their valuable data are protected from dangerous power surges, spikes and blackouts.
Specification
| Main Input Voltage | 230 V |
|---|---|
| Main Output Voltage | 230 V |
| rated power in W | 300 W |
| Rated power in VA | 500 VA |
| Input Connection Type | IEC 60320 C14 |
| output connection type | 3 IEC 60320 C13 1 IEC 60320 C13 surge 2 IEC Jumpers surge |
| Number of cables | 2 |
| Battery type | Lead-acid battery |
| Provided equipment | CD with software Documentation CD 1 x detachable IEC power cord 1 x detachable 1.2 m IEC power cord Telephone cable USB cable Warranty card |
| Max runtime | 45 min |
|---|---|
| Number of power module free slots | 0 |
| Number of power module filled slots | 0 |
| Redundant | No |
| Colour | Beige |
|---|---|
| Height | 16.5 cm |
| Width | 9.1 cm |
| Depth | 28.4 cm |
| Net weight | 6.32 kg |
| Mounting location | Front |
| Mounting preference | No preference |
| Mounting mode | Not rack-mountable |
| Two post mountable | 0 |
| USB compatible | No |
| Network frequency | 47...63 Hz 50/60 Hz +/- 3 Hz auto-sensing |
|---|---|
| Input voltage limits | 160...300 V adjustable 180...266 V |
| Maximum input current | 7 A |
| Switching current capacity | 7 A |
| Maximum configurable power in W | 300 W |
|---|---|
| Output frequency | 47...63 Hz sync to mains 50/60 Hz +/- 1 Hz unsynchronised |
| UPS type | Standby |
| Wave type | Stepped approximation to a sinewave |
| Maximum configurable power in VA | 500 VA |
| Transfer time | 6 ms typical : 10 ms maximum |
| Product certifications | C-Tick CE GOST VDE |
|---|---|
| Standards | EN/IEC 62040-1:2019/A11:2021 EN/IEC 62040-2:2006/AC:2006 EN/IEC 62040-2:2018 |
| Ambient air temperature for operation | 0…40 °C |
|---|---|
| Relative humidity | 0…95 % |
| Operating altitude | 0...10000 ft |
| Ambient air temperature for storage | -15…45 °C |
| Storage Relative Humidity | 0…95 % |
| Storage altitude | 0.00…15240.00 m |
| Acoustic level | 40 dBA |
| heat dissipation | 24 Btu/h |
| Number of battery filled slots | 0 |
|---|---|
| Number of battery free slots | 0 |
| Battery recharge time | 8 h |
| Number of battery replacement quantity | 1 |
| Battery voltage | 12 V |
| Battery capacity | 7.0 Ah |
| Battery charger power | 10 W rated |
| Battery power in VAH | 83 VAh capacity 84 VAh runtime |
| Battery life | 4…6 year(s) |
| Extended runtime | 0 |
| Free slots | 0 |
|---|---|
| Control panel | LED status display with on line : on battery : replace battery and overload indicators |
| Alarm | Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
| Surge energy rate | 310 J |
|---|---|
| Noise suppression | Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449 |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 17.8 cm |
| Package 1 Width | 24.1 cm |
| Package 1 Length | 36.8 cm |
| Package 1 Weight | 7.05 kg |
| Unit Type of Package 2 | PAL |
| Number of Units in Package 2 | 30 |
| Package 2 Height | 133 cm |
| Package 2 Width | 100 cm |
| Package 2 Length | 120 cm |
| Package 2 Weight | 490 kg |
| SCC14 | 10731304016356 |
| Warranty | 2 years repair or replace |
|---|
The Custom Tab allows you to display personalized content on your product page with full flexibility.
You can easily manage what appears inside this tab by choosing one of the following options:
- Manual Input: Enter content directly in the theme settings.
- Metafield Source: Connect the tab to a metafield to display dynamic, product-specific information.
- Page Content: Pull existing content from a Shopify page to reuse or centralize updates.
This feature is ideal for showing size guides, care instructions, brand stories, shipping details, or any custom information you want your customers to see — all without touching any code.