© 2026. Powered by C2 Computer. All Rights Reserved.
HPE R8Q70-61001 Aruba 6200M 48G Class4 PoE 4SFP+ Switch | USED
Couldn't load pickup availability

HPE R8Q70-61001 Aruba 6200M 48G Class4 PoE 4SFP+ Switch | USED
Part Number: R8Q70-61001
Condition: Used
**HPE R8Q70-61001 Aruba 6200m 48g Class4 Poe 4sfp+ Switch - Switch - Max. Stacking Distance 10 Kms - 48 Ports - Managed - Rack-mountable :**
**Key Features :**
Device Type :switch - 48 Ports - L3 - Managed - Stackable
Enclosure Type : Front And Side To Back Rack-mountable 1u
Subtype : Gigabit Ethernet
Ports : 48 X 10/100/1000 (poe+) + 4 X 1 Gigabit / 10 Gigabit Sfp+ (uplink / Stacking)
Power Over Ethernet (poe) : Poe+
Poe Budget : 1440 W
Performance : Switching Capacity: 176 Gbps ¦ Throughput: 130.9 Mpps ¦ Latency (1 Gbps): 2.28 ¥s ¦ Latency (10 Gbps): 1.46 ¥s ¦ Packet Buffer Size: 8 Mb ¦ Stacking Bandwidth: 40 Gbps
Capacity : Switched Virtual Interfaces (svis): 128 ¦ Ipv4 Host Table Capacity: 8000 ¦ Ipv6 Host Table Capacity: 8000 ¦ Ipv4 Routes (unicast): 2000 ¦ Ipv6 Routes (unicast): 2000 ¦ Igmp Groups: 1000 ¦ Mld Groups: 1000 ¦ Ipv4 Acl Entries (ingress): 1000 ¦ Ipv6 Acl Entries (ingress): 1000 ¦ Mac Acl Entries (ingress): 1000 ¦ Ipv4 Acl Entries (egress): 512 ¦ Ipv6 Acl Entries (egress): 256 ¦ Mac Acl Entries (egress): 512
Mac Address Table Size : 16000 Entries
Jumbo Frame Support : 9220 Bytes
Max Units In A Stack : 8
Routing Protocol : Ospf, Rip-2, Ospfv2, Ospfv3, Ecmp
Remote Management Protocol : Snmp, Snmp 3, Snmp 2c, Cli
Encryption Algorithm : Md5, Ssl, Fips 140-2
Authentication Method : Radius, Tacacs+
Features : Layer 2 Switching, Arp Support, Diffserv Support, Virtual Route Redundancy Protocol (vrrp) Support, Quality Of Service (qos), Trusted Platform Module (tpm), Equal-cost Multipath (ecmp), Uni-directional Link Detection (udld), Deficit Weighted Round Robin (dwrr), Management Information Base (mib), Class Of Service (cos), Type Of Service (tos), Bridge Protocol Data Unit (bpdu), Source-specific Multicast (ssm), Network Timing Protocol (ntp), Security Slot (kensington Security Lock Compatible), Rapid Pvst+ (rpvst+), Dns Support, Igmp Support, Unidirectional Link Detection (udld), Automatic Media-dependent Interface Crossover (mdix), Web Gui Management Portal, Unsupported Transceiver Mode (utm), Egress Queue Shaping (eqs)
Compliant Standards : Ieee 802.3, Ieee 802.1d, Ieee 802.1q, Ieee 802.1p, Ieee 802.3af, Ieee 802.3ad (lacp), Ieee 802.1w, Ieee 802.1s, Ieee 802.1ab (lldp), Ieee 802.3at
Processor : 1 X Arm: 1.8 Ghz
Ram : 8 Gb Ddr4 Sdram
Flash Memory : 16 Gb
**Expansion / Connectivity :**
Interfaces :
48 X 10/100/1000 Base-t (poe+) Rj-45 Poe Class 4
4 X 1/10gbit Lan Sfp+ 2x Lrm, 2x Lrm/macsec 256
1 X Console Rj-45
1 X Management Rj-45
1 X Console (usb) Type C
1 X Usb Type A Host
**Power :**
Power Device : Internal Power Supply (not Installed)
Max Supported Qty : 2
Voltage Required : Ac 100-120/200-240 V (50/60 Hz)
Power Consumption Operational : 74 Watt
Power Consumption Stand By : 59 Watt
The Custom Tab allows you to display personalized content on your product page with full flexibility.
You can easily manage what appears inside this tab by choosing one of the following options:
- Manual Input: Enter content directly in the theme settings.
- Metafield Source: Connect the tab to a metafield to display dynamic, product-specific information.
- Page Content: Pull existing content from a Shopify page to reuse or centralize updates.
This feature is ideal for showing size guides, care instructions, brand stories, shipping details, or any custom information you want your customers to see — all without touching any code.