(NEW VENDOR) QNAP QSW-M1204-4C 12 Ports 10GbE Layer 2 Managed Switch Switching Capacity: 240Gbps | Management Type: Web Managed

This switch sports eight SFP+ ports and four 10GbE SFP+/ RJ45 combo ports. These combo ports are compatible with 10GbE and NBase-T technologies to support five speeds including 10, 5, 2.5, and Gigabit Ethernet, as well as 100M Fast Ethernet speed, all via existing cables.

The QNAP Switch System (QSS) is easy to use and provides an overview dashboard, port management, and a setting guide, making central network management intuitive.

Utilize Layer 2 management features such as LACP, VLAN, ACL, and LLDP so IT can efficiently control network bandwidth and enhance security.

Rapid Spanning Tree Protocol (RSTP) easily and efficiently deploys small and medium-scale networks that support expansion, redundancy, and loop prevention.

Compliant with IEEE 802.3az Energy Efficient Ethernet and IEEE 802.3x Flow Control in full-duplex mode, the QSW-M1204-4C avoids packet loss from unparalleled bandwidth and reduces power consumption for low-speed and inactive connections.

QSS can be updated with just one click, helping IT staff ensure their network security.

The QSW-M1204-4C provides eight SFP+ and four SFP+/RJ45 combo ports for connecting different interfaces. With RJ45 interfaces, 10GbE is supported using Cat 6a (or above) cables. Direct Attach Copper (DAC) cables can be used with SFP+ ports for connecting to servers inside a rack. The switching capacity of the QSW-M1204-4C is 240 Gb/s, guaranteeing the full potential of each port. The QSW-M1204-4C is also compatible with 10GbE and NBase-T technologies to support up to five speeds: 10G, 5G, 2.5G, 1G, and 100M. The SFP+/RJ45 combo ports provide higher transmission speeds with existing cables. Depending on cable types and their lengths, different speeds can be achieved for faster, more efficient data transfer. Please note, if the distance between the switch and the device is less than 148', a Cat 6 cable can be used to achieve 10 Gb/s speeds.

The QNAP Switch System (QSS) features an easy-to-use Web GUI. At-a-glance major functions, flat control layers, and one-click login simplify setup and management. Furthermore, the GUI's visual illustration matches physical ports for greater usability. Use the settings guide, status chart reference, and online firmware updates to reduce learning and management costs.

View real-time system information, port connection status, port traffic, and packet statistics, and configure port speeds. A convenient step-by-step guide and intro will have you up and running in two shakes. Plus, with exclusive status chart referencing, you can refer to four major status charts during each configuration, eliminating the need to go back and forth between different settings pages. Online firmware checking and updates allow you to easily keep your QSW-M1204-4C secure.

The QSW-M1204-4C provides bandwidth and packet control functions such as LACP, VLAN, QoS, and IGMP snooping to boost network performance through IP grouping and bandwidth management.

Powerful security and system functions including ACL, LLDP, RSTP, and Flow Control help administrators enhance network reliability using access controls, troubleshooting, loop prevention, and avoid packet loss.

With its smart cooling system, the QSW-M1204-4C ensures high-speed network performance without distracting background noise. IEEE 802.3az (EEE) support also reduces power consumption without sacrificing performance or functionality. By dynamically detecting link speeds and activities and adjusting accordingly, the QSW-M1204-4C provides energy savings of up to 50% to minimize operational costs.

The QSW-M1204-4C features a modern design intended to blend in at home or the office. A rackmount hardware kit is included to provide extra installation options.