Skip to product information

HPE R8S89-61001 Aruba 6300M 24-port SFP+ and 4-port SFP56 Class6 PoE Switch | USED

Vendor: HPE
SKU: R8S89-61001
Availability: Many in stock
Product type: NETWORKING-SWITCH
HKD 126,536.00
HPE R8S89-61001 Aruba 6300M 24-port SFP+ and 4-port SFP56 Class6 PoE Switch | USED
HPE R8S89-61001 Aruba 6300M 24-port SFP+ and 4-port SFP56 Class6 PoE Switch | USED
HKD 126,536.00

HPE R8S89-61001 Aruba 6300M 24-port SFP+ and 4-port SFP56 Class6 PoE Switch | USED

Part Number: R8S89-61001

Condition: Used


**HPE R8S89-61001 Aruba 6300m 24-port Sfp+ And 4-port Sfp56 Switch - Switch - L3 - Managed - 24 X 100/1000/2.5g/5g/10gbase-t (4ppoe) + 2 X 10 Gigabit / 25 Gigabit / 50 Gigabit Sfp56 (uplink / Stacking) + 2 X 10 Gigabit / 25 Gigabit Sfp56 - Rack-mountable - 4ppoe. :**

**Key Features :**

Device Type: Switch - 24 Ports - L3 - Managed - Stackable

Enclosure Type: Rack-mountable 1u

Subtype: Gigabit Ethernet

Ports: 24 X 100/1000/2.5g/5g/10gbase-t (4ppoe) + 2 X 10 Gigabit / 25 Gigabit / 50 Gigabit Sfp56 (uplink / Stacking) + 2 X 10 Gigabit / 25 Gigabit Sfp56

Power Over Ethernet (poe): 4ppoe

Performance:

Switching Capacity: 880 Gbps Throughput: 654 Mpps Latency (1 Gbps): 4.24 Latency (10 Gbps): 1.5 Latency (25 Gbps): 2.91 Latency (50 Gbps): 3.49 Stacking Bandwidth: 200 Gbps

Capacity:

Switched Virtual Interfaces (svis): 1024 Ipv4 Host Table Capacity: 49152 Ipv6 Host Table Capacity: 49152 Ipv4 Routes (unicast): 61000 Ipv6 Routes (unicast): 61000 Ipv4 Routes (multicast): 8192 Ipv6 Routes (multicast): 8192 Igmp Groups: 8192 Mld Groups: 8192 Ipv4 Acl Entries (ingress): 20480 Ipv6 Acl Entries (ingress): 5120 Mac Acl Entries (ingress): 20480 Ipv4 Acl Entries (egress): 8192 Ipv6 Acl Entries (egress): 2048 Mac Acl Entries (egress): 8192

Mac Address Table Size: 32768 Entries

Jumbo Frame Support: 9198 Bytes

Routing Protocol:

Ospf, Bgp-4, Bgp, Igmpv2, Igmp, Vrrp, Ospfv2, Pim-sm, Pim-dm, Igmpv3, Gre, Ospfv3, Msdp, Ecmp, Policy-based Routing (pbr), Mld, Bidirectional Forwarding Detection (bfd), Mstp, Rstp, Stp

Remote Management Protocol: Snmp, Rmon, Telnet, Snmp 3, Snmp 2c, Tftp, Ssh, Cli, Sftp

Authentication Method: Secure Shell (ssh), Radius, Tacacs+, Secure Shell V.2 (ssh2)

Features:

Vlan Support, Auto-uplink (auto Mdi/mdi-x), Syslog Support, Ipv6 Support, High Availability, Sflow, Spanning Tree Protocol (stp) Support, Rapid Spanning Tree Protocol (rstp) Support, Per-vlan Spanning Tree (pvst), Multiple Spanning Tree Protocol (mstp) Support, Access Control List (acl) Support, Quality Of Service (qos), Deficit Weighted Round Robin (dwrr), Lldp Support, Fan Tray, Management Information Base (mib), Dhcp Protection, Dual Firmware Images, Multiple Vlan Registration Protocol (mvrp), Packet Storm Protection, Class Of Service (cos), Broadcast Storm Protection, Type Of Service (tos), Bridge Protocol Data Unit (bpdu), Virtual Extensible Lan (vxlan), Multicast Storm Protection, Network Timing Protocol (ntp), Ra Guard, Zero-touch Provisioning (ztp), Protocol Independent Multicast (pim), Vlan Tagging, Rapid Reconfiguration Of Spanning Tree (rstp), Ipv4 And Ipv6 Dual Stack, Ip Multicast, Bootstrap Router (bsr) Mechanism, Aruba Virtual Switching Framework (vsf), Dynamic Ipv6 Lockdown, Nd Snooping, Unicast Storm Protection, Microsoft Network Load Balancer (nlb)

Compliant Standards:

Ieee 802.1d, Ieee 802.1q, Ieee 802.1p, Ieee 802.3af, Ieee 802.3ad (lacp), Ieee 802.1w, Ieee 802.1x, Ieee 802.1s, Ieee 802.1t, Ieee 802.1v, Ieee 802.1ab (lldp), Ieee 802.1ak, Ieee 802.3at, Ieee 802.1ax, Ieee 802.3bt

Processor: 1 X Arm: 1.8 Ghz

Ram: 8 Gb Ddr4 Sdram

Flash Memory: 32 Gb

**Expansion / Connectivity :**

Interfaces:

24 X 10/100/1000 Base-t Rj-45

2 X 10gbit/25gbit/50gbit Sfp56

2 X 10gbit/25gbit Sfp56

1 X Usb-c Console

1 X Console Rj-45

1 X Usb Type A Host

**Power :**

Power Device: Internal Power Supply - Hot-plug

Installed Qty: 1

Max Supported Qty: 2

Power Redundancy: Optional

Power Redundancy Scheme: 1+1 (with Optional Power Supply)

Voltage Required: (50/60 Hz)

The Custom Tab allows you to display personalized content on your product page with full flexibility.

You can easily manage what appears inside this tab by choosing one of the following options:

  • Manual Input: Enter content directly in the theme settings.
  • Metafield Source: Connect the tab to a metafield to display dynamic, product-specific information.
  • Page Content: Pull existing content from a Shopify page to reuse or centralize updates.

This feature is ideal for showing size guides, care instructions, brand stories, shipping details, or any custom information you want your customers to see — all without touching any code.

Recently viewed products

Related products