© 2026. Powered by C2 Computer. All Rights Reserved.
HPE R8S89A Aruba 6300M 24-port SFP+ and 4-port SFP56 Class6 PoE Switch | USED
Couldn't load pickup availability

HPE R8S89A Aruba 6300M 24-port SFP+ and 4-port SFP56 Class6 PoE Switch | USED
Part Number: R8S89A
Condition: Used
**HPE R8S89A Aruba 6300m 24-port Sfp+ And 4-port Sfp56 Switch - Switch - L3 - Managed - 24 X 100/1000/2.5g/5g/10gbase-t (4ppoe) + 2 X 10 Gigabit / 25 Gigabit / 50 Gigabit Sfp56 (uplink / Stacking) + 2 X 10 Gigabit / 25 Gigabit Sfp56 - Rack-mountable - 4ppoe. :**
**Key Features :**
Device Type: Switch - 24 Ports - L3 - Managed - Stackable
Enclosure Type: Rack-mountable 1u
Subtype: Gigabit Ethernet
Ports: 24 X 100/1000/2.5g/5g/10gbase-t (4ppoe) + 2 X 10 Gigabit / 25 Gigabit / 50 Gigabit Sfp56 (uplink / Stacking) + 2 X 10 Gigabit / 25 Gigabit Sfp56
Power Over Ethernet (poe): 4ppoe
Performance:
Switching Capacity: 880 Gbps ¶ Throughput: 654 Mpps ¶ Latency (1 Gbps): 4.24 Μs ¶ Latency (10 Gbps): 1.5 Μs ¶ Latency (25 Gbps): 2.91 Μs ¶ Latency (50 Gbps): 3.49 Μs ¶ Stacking Bandwidth: 200 Gbps
Capacity:
Switched Virtual Interfaces (svis): 1024 ¶ Ipv4 Host Table Capacity: 49152 ¶ Ipv6 Host Table Capacity: 49152 ¶ Ipv4 Routes (unicast): 61000 ¶ Ipv6 Routes (unicast): 61000 ¶ Ipv4 Routes (multicast): 8192 ¶ Ipv6 Routes (multicast): 8192 ¶ Igmp Groups: 8192 ¶ Mld Groups: 8192 ¶ Ipv4 Acl Entries (ingress): 20480 ¶ Ipv6 Acl Entries (ingress): 5120 ¶ Mac Acl Entries (ingress): 20480 ¶ Ipv4 Acl Entries (egress): 8192 ¶ Ipv6 Acl Entries (egress): 2048 ¶ Mac Acl Entries (egress): 8192
Mac Address Table Size: 32768 Entries
Jumbo Frame Support: 9198 Bytes
Routing Protocol:
Ospf, Bgp-4, Bgp, Igmpv2, Igmp, Vrrp, Ospfv2, Pim-sm, Pim-dm, Igmpv3, Gre, Ospfv3, Msdp, Ecmp, Policy-based Routing (pbr), Mld, Bidirectional Forwarding Detection (bfd), Mstp, Rstp, Stp
Remote Management Protocol: Snmp, Rmon, Telnet, Snmp 3, Snmp 2c, Tftp, Ssh, Cli, Sftp
Authentication Method: Secure Shell (ssh), Radius, Tacacs+, Secure Shell V.2 (ssh2)
Features:
Vlan Support, Auto-uplink (auto Mdi/mdi-x), Syslog Support, Ipv6 Support, High Availability, Sflow, Spanning Tree Protocol (stp) Support, Rapid Spanning Tree Protocol (rstp) Support, Per-vlan Spanning Tree (pvst), Multiple Spanning Tree Protocol (mstp) Support, Access Control List (acl) Support, Quality Of Service (qos), Deficit Weighted Round Robin (dwrr), Lldp Support, Fan Tray, Management Information Base (mib), Dhcp Protection, Dual Firmware Images, Multiple Vlan Registration Protocol (mvrp), Packet Storm Protection, Class Of Service (cos), Broadcast Storm Protection, Type Of Service (tos), Bridge Protocol Data Unit (bpdu), Virtual Extensible Lan (vxlan), Multicast Storm Protection, Network Timing Protocol (ntp), Ra Guard, Zero-touch Provisioning (ztp), Protocol Independent Multicast (pim), Vlan Tagging, Rapid Reconfiguration Of Spanning Tree (rstp), Ipv4 And Ipv6 Dual Stack, Ip Multicast, Bootstrap Router (bsr) Mechanism, Aruba Virtual Switching Framework (vsf), Dynamic Ipv6 Lockdown, Nd Snooping, Unicast Storm Protection, Microsoft Network Load Balancer (nlb)
Compliant Standards:
Ieee 802.1d, Ieee 802.1q, Ieee 802.1p, Ieee 802.3af, Ieee 802.3ad (lacp), Ieee 802.1w, Ieee 802.1x, Ieee 802.1s, Ieee 802.1t, Ieee 802.1v, Ieee 802.1ab (lldp), Ieee 802.1ak, Ieee 802.3at, Ieee 802.1ax, Ieee 802.3bt
Processor: 1 X Arm: 1.8 Ghz
Ram: 8 Gb Ddr4 Sdram
Flash Memory: 32 Gb
**Expansion / Connectivity :**
Interfaces:
24 X 10/100/1000 Base-t Rj-45
2 X 10gbit/25gbit/50gbit Sfp56
2 X 10gbit/25gbit Sfp56
1 X Usb-c Console
1 X Console Rj-45
1 X Usb Type A Host
**Power :**
Power Device: Internal Power Supply - Hot-plug
Installed Qty: 1
Max Supported Qty: 2
Power Redundancy: Optional
Power Redundancy Scheme: 1+1 (with Optional Power Supply)
Voltage Required: (50/60 Hz)
The Custom Tab allows you to display personalized content on your product page with full flexibility.
You can easily manage what appears inside this tab by choosing one of the following options:
- Manual Input: Enter content directly in the theme settings.
- Metafield Source: Connect the tab to a metafield to display dynamic, product-specific information.
- Page Content: Pull existing content from a Shopify page to reuse or centralize updates.
This feature is ideal for showing size guides, care instructions, brand stories, shipping details, or any custom information you want your customers to see — all without touching any code.