Teltonika SWM280000200 SWM280 L2+ Managed Switch | USED

Teltonika SWM280000200 SWM280 L2+ Managed Switch | USED

Part Number: SWM280000200

Condition: Used

**TELTONIKA SWM280000200 Swm280 L2+ Managed Switch 24x Total Eth 12x Poe 4x Sfp Ports 1.**

**Ethernet :**

fiber : 4 X Sfp Ports

ieee 802.3 Series Standards : 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az

eth : Multi-layer Managed 24 X Eth Ports, 10/100/1000 Mbps, Supports Auto Mdi/mdix Crossover

**Network :**

routing : Dynamic Routing (bgp, Ospf V2, Rip V1/v2, Eigrp)

l2 Features : Loop Protection, Forwarding Table, Vlan, Stp/rstp

dhcp : Dhcp Server, Dhcp Client, Dhcp Static Leases Capable Of Using Mac With Wildcards

port Settings : Enable/disable, Link Speed Control, Port Isolation, Poe Management, Eee (802.3az) Management, Port Mirroring

l3 Features : Static Ipv4 Routing, Static Ipv6 Routing, Dhcpv6 Client, Static Ipv6 Address

**Security :**

uthentication : Pam — Preshared Key, Radius & Tacacs+, Ip & Login Attempts Block

vlan : Port Vlan Separation

802.1x : Port-based Network Access Control Client And Server

mac Filtering Support : Allow Specific Mac Addresses To Connect Through Specified Ports, Ignore Unauthorized Or Disable The Port If An Unauthorized Mac Address Is Detected

**System Characteristics :**

cpu : Realtek, Single Core, 500mhz, Mips-4kec

ram : 128mb, Ddr3

flash Storage : 16 Mb Serial Flash

**Firmware/configuration :**

web Ui : Update Fw From File, Check Fw On Server, Configuration Profiles, Configuration Backup

fota : Update Fw

rms : Update Fw/configuration For Multiple Devices At Once

keep Settings : Update Fw Without Losing Current Configuration

**Firmware Customisation :**

operating System : Swmos (openwrt Based Linux Os)

supported Languages : Busybox Shell, Lua, C, C++

development Tools : Sdk Package With Build Environment Provided

package Manager : The Package Manager Is A Service Used To Install Additional Software On The Device

**Poe Out :**

poe+ Ports : Ports 1-24

poe Standards : Ieee 802.3af (poe, Type 1) And Ieee 802.3at (poe+, Type 2), Alternative A

poe Max Power Per Port (at Pse) : 30 W

total Poe Power Budget (at Pse) : 300 W

**Power :**

connector : C14 Connector

input Voltage Range : 100-240 Vac, 50/60 Hz

power Consumption : Idle: 9 W / Max: 330 W / Poe Max: 300

**Physical Interfaces :**

ethernet : 24 X Rj45 Ports, 10/100/1000 Mbps

fiber : 4 X Sfp Ports

status Leds : 1 X Power Led, 48 X Eth Status Leds, 1 X Status Led, 4 X Sfp Status Leds

power : 1 X C14 Connector

reset : Software Reset Button

other : 1 X Grounding Screw

**Operating Environment :**

operating Temperature : 0 °c To 50 °c

operating Humidity : 10% To 90% Non-condensing

ingress Protection Rating : Ip30

**Performance Specifications :**

bandwidth (non-blocking) : 56 Gbps

forwarding Rate : 83.33 Mpps

packet Buffer : 512 Kb

mac Address Table Size : 8k Entries

jumbo Frame Support : 10000 Bytes